7. Low-voltage Protection: if battery level is lower than
3.2v, when you press the Fire Button, the screen will
display “LOW BATTERY”
Firmware update:
Please Note: This device is built with the, simple to
understand and easy to use wattage mode/bypass
mode as the default firmware. If you prefer temperature
control, a TC firmware is available for you to download
and flash to your device.
Check your firmware version by holding “+” and “-”
buttons for 2s when the device is off.
Go to the following link to check if there's an update
available for your TOPSIDE firmware.
https://www.dovpoecig.com/topside-squonker
Follow the instruction on this webpage to update your
TOPSIDE firmware to the latest version.
WARNING
1. Please use all accessories as intended to avoid
damage to your device.
2. When not using your device for a long period of time,
please take out the batteries from the device.
3. Should damage occur, please do not attempt to repair
by yourself. Use any available warranty, in the first
instance contact the reseller you purchased the unit from
4. Please keep this product and accessories away from
children and pets.
5. To clean the device, use only a slightly damp towel, and
do not allow moisture to get inside of the device.
6. Over-temperature Protection: if the board temperature
goes over 75℃/167°F, the device will cut power, when
you press Fire Button, the screen will display
“TOO HOT”
7. Low-voltage Protection: if battery level is lower than 6.4v
when you press the Fire Button, the screen will display
“LOW BATTERY”.
Summary of Contents for TOPSIDE Top Fill Squonk
Page 1: ......
