Dovpo ROGUE 100, User Manual

Page: 6 / 8

11. Replace Atomizer
When replacing an atomizer, the display will show a New/
Same interface. See following picture.
Press the "+" button to confirm that is a new atomizer,
press the "-" button to confirm it is the same atomizer
and the resistance will stay the same.
12. Wattage/Temperature Lock
Hold both Fire Button and “-” button to lock the wattage/
temperature. The message “SYSTEM LOCKED” will appear
on screen. While wattage/temperature is locked, the
message “PRESS FIRE & DOWN TO UNLOCK” will appear
on screen when pressing “+” or “-” button, hold both
Fire Button and “-” button to unlock. You will see the
message “SYSTEM UNLOCKED” appear on screen.
ERROR MESSAGES
No Atomizer: “CHECK ATOMIZER”
Short Circuit: “SHORTED”
Resistance is higher than 5.0
Ω
HIGH ATOMIZER”
Resistance is lower than 0.1
Ω
: “HIGH ATOMIZER”
Board Temperature is above 80
℃
: “OVERHEAT”
Battery Voltage is below 2.8V: “LOW BATTERY”
Keep pressing the Fire Button for over 10s: “OVER 10S”
: “
5