Dovpo Ember 80 Kit, User Manual

Page: 4 / 8

7. Replace Atomizer
When replacing an atomizer, the display will show a
New/Same interface. See following picture. Press "+"
button to confirm that is a new atomizer, press "-" button
to confirm it is the same atomizer and the resistance will
stay the same.
5. Wattage Adjustment
When in Wattage Mode, adjust wattage by pressing “+”
or “-” button to increase or decrease wattage by 1.0
increments, hold either button to accelerate.
6. Temperature Adjustment
You can see the wire type at the bottom right corner of
the temperature value. Press “+” or “-” button to adjust
temperature in 5°C/10°F increment, when it reaches the
highest point of temperature in Celcius, press “+” button
again, it will go to the lowest point of temperature in
Fahrenheit. It works the other way around.
0.00 Ω
0.00V
80.0w
0.00 Ω
20.0w
200
Ni
F
Temp Value Unit
Wire Type Resistance
Wattage
Battery Indicator
NEW ATOMIZER?
YES+/ NO-
008
4.10V
80.0w
Output Voltage
Puff Counter
Wattage
8. Vaping
8.1 When in Wattage Mode, it will display wattage value on
the left and output voltage on the upper right corner
and puff counter on the bottom right corner.
3