3
OM-POWER PREP UNLIMITED
Place the other rear (larger) rib set against the back wall of the sink.
Install the second front and rear rib sets.
Leave a finger-size gap between rib sets.
Partitions
Next, place wash tank partition in the gaps between the front and rear pairs of rib
sets. Make sure the partition goes all the way down and is not snagged on the ends
of the rib sets.
Flow Guides
Once the partition is in place, the flow guides can be installed. Start by positioning a
notched end of the flow guide adjacent to the hooks of the front rib set.
Begin bending the flow guide to the shape of the front rib set, and allow the notches
of the flow guide to engage the hooks of the rear rib set.
Continue to push the flow guide down against the rib sets until the notched end of the
flow guide nearest you is adjacent to the hooks of the rear rib set.
GAP BETWEEN FRONT
RIB SECTIONS
BOTTOM OF PARTITION
FRONT
HOOK
FLOW
GUIDE
REAR
HOOK
FLOW
GUIDE
REAR
HOOK
