13
SERVICING THE PLANETARY SET
1.
Remove the retaining rings from the planet pins.
2.
Remove the pins from the carrier by carefully tapping them out.
3.
Remove the planet gears, washers and bearings from the carrier.
4.
Inspect the pins, bearings, and gear bores for evidence of wear and replace if necessary.
5.
Before reassembly, be sure to insert the thrust plate into the carrier.
6.
To reassemble, be careful to line up the planet pins with the washers and bearings then press
the knurled part of the pin into the carrier. If the pins are not lined up properly, the washers
can be shattered during the pressing operation.
7.
Replace the retaining rings onto the planet pins.
Summary of Contents for TWG TULSA WINCH 707W
Page 4: ...4 HYDRAULIC SCHEMATIC...
