WIL-13001-E-01
10
ALLOY C PUMPS
PS800 ALLOY C
FULL-STROKE
PTFE-FITTED
Ship Weight…...………Alloy C 107 kg (236 lb)
Air Inlet……………………………………….3/4"
Inlet…………………………….........51 mm (2")
Outlet………………………………...51 mm (2")
Suction Lift………………..…..5.9 m Dry (19.5
′
)
8.6 m Wet (28.4
′
)
Disp. per Stroke
1
……………....2.4 L (0.63 gal)
Max. Flow Rate……………662 lpm (175 gpm)
Max. Size Solids……………….6.4 mm (1/4")
1
Displacement per stroke was calculated at 4.8
bar (70 psig) air inlet pressure against a 2.1 bar
(30 psig) head pressure.
Example:
To pump 288 lpm (76 gpm)
against a discharge head of 2.1 bar (30 psig)
requires 4.1 bar (60 psig) and 71 Nm
3
/h
(42 scfm) air consumption.
Flow rates indicated on chart were determined by pumping water. For optimum life and performance, pumps
should be specified so that daily operation parameters will fall in the center of the pump's performance curve.
Caution: Do not exceed 8.6 bar (125 psig) air supply pressure.
PS800 ALLOY C
RUBBER-FITTED
Ship Weight…...………Alloy C 107 kg (236 lb)
Air Inlet……………………………………….3/4"
Inlet…………………………….........51 mm (2")
Outlet………………………………...51 mm (2")
Suction Lift………………..…..6.4 m Dry (21.0
′
)
8.6 m Wet (28.4
′
)
Disp. per Stroke
1
……………....2.6 L (0.69 gal)
Max. Flow Rate……………647 lpm (171 gpm)
Max. Size Solids……………….6.4 mm (1/4")
1
Displacement per stroke was calculated at 4.8
bar (70 psig) air inlet pressure against a 2.1 bar
(30 psig) head pressure.
Example:
To pump 481 lpm (127 gpm)
against a discharge head of 1.4 bar (20 psig)
requires 5.5 bar (80 psig) and 122 Nm
3
/h
(72 scfm) air consumption.
Flow rates indicated on chart were determined by pumping water. For optimum life and performance, pumps
should be specified so that daily operation parameters will fall in the center of the pump's performance curve.
Caution: Do not exceed 8.6 bar (125 psig) air supply pressure.
PERFORMANCE
PERFORMANCE
