Dover PSG Wilden Pro-Flo 230/SSPPP, Engineering, Operation & Maintenance

Page: 9 / 28

WIL-11570-E-03
Wilden
® 9
PERFORMANCE
P220/P230 METAL
RUBBER-FITTED
Ship Weight........... Aluminum 11 kg (24 lb)
Ductile Iron 21 kg (47 lb)
316 Stainless Steel 23 kg (51 lb)
Air Inlet .................................... 6 mm (1/4")
Inlet...........................................25 mm (1")
Outlet ........................................25 mm (1")
Suctio n Lift...................... 5.4 m Dry (17.6')
9.3 m Wet (30.6')
Disp. Per Stroke
1....................................
0.30 L (0.08 gal)
Max. Flo w Rate ............. 212 lpm (56 gpm)
Max. Size Solids ................... 6.4 mm (1/4")
1 Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example: To pump 56.8 lpm (15 gpm)
against a discharge pressure head of
3.3 bar (48 psig) requires 4.1 bar (60 psig)
and 34 Nm
3
/h (20 scfm) air consumption.
(See dot on chart.)
Flow rates indicated on chart were determined by pumping water.
For optimum life and performanc e, pumps should be specified so that daily
operation parameters will fall in the center of the pump's performa nc e curve.
P220/P230 METAL
TPE-FITTED
Ship Weight........... Aluminum 11 kg (24 lb)
Ductile Iron 21 kg (47 lb)
316 Stainless Steel ................ 23 kg (51 lb)
Air Inlet .................................... 6 mm (1/4")
Inlet...........................................25 mm (1")
Outlet ........................................25 mm (1")
Suctio n Lift...................... 4.1 m Dry (13.6')
9.3 m Wet (30.6')
Disp. Per Stroke 1 .................0.34 L (0.09 gal)
Max. Flow Rate .............. 212 lpm (56 gpm)
Max. Size Solids ................... 6.4 mm (1/4")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example: To pump 60.6 lpm (16 gpm)
against a discharge pressure head of
3.2 bar (47 psig) requires 4.1 bar (60 psig)
and 34 Nm3/h (20 scfm) air consumption.
(See dot on chart.)
Section 5
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily operation
parameters will fall in the center of the pump's performance curve