background image

7

KPTI011-EN rev 

 201

-0

-1

 

Please visit OPW’s website: www.opwglobal.com for further information

WARRANTY/REVISION HISTORY

8. REVISION HISTORY

Revision number

Date

Description

Approved by

0

2015-02-05

EMEA layout and adaption

David Kiklhorn

1

2015-02-17

New spare part illustration

David Kiklhorn

7. PRODUCT WARRANTY

OPW warrants that products sold by it are free from defects in materials and workmanship for a period of one (1) year from the date of 

shipment by OPW. As the exclusive remedy under this limited warranty, OPW, will at its sole discretion, repair, replace or issue credit for 

future orders for any product that may prove defective within the one year period.

This warranty shall not apply to any product which has been altered, repaired by any party other than a service representative authorized 

by OPW, or when failure is due to misuse, conditions of use, or improper installation and maintenance. OPW shall in no instance have any 

liability whatsoever for special, incidental, or consequential damages to any part, and shall have no liability for the cost of labour, fright, 

excavation, clean up, downtime removal, reinstallation, loss of profit or any other cost  or charges in excess of the amount of the invoice 

for the products.

Gasket and jaws are consumer’s goods and their wearing is depending on frequency of usage.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY THE WARRANTIES OF MERCHANTABIL-

ITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE 

HEREOF.

4QBSFQBSUJMMVTUSBUJPOVQEBUF-VEWÓL%ǔDLâ

Summary of Contents for OPW OT Series









Reviews: