Safety - Installation
Instruction manual
5
When working with hot ink, Markem-Imaje recommends wearing
protective gloves and safety goggles.
A dry chemical or CO2 extinguisher should be installed near the
printer as suitable extinguishing media; do not use water.
■ Labels
Hot Surfaces
. This label indicates hot surfaces. To prevent
injury from burns, do not touch the jet array surface or hot ink
directly. Wear protective eyeglasses when working with hot
ink.
Protective Earth
. This label identifies a protective earth
point.
High Voltage
. This label indicates high voltages inside the
printer. To prevent injury from electrical shock, disconnect
the power cord from the electrical outlet before servicing the
enclosure.
Earth
. This label identifies an earth point.
WARNING:
Use of non Markem-Imaje specific hot
melt ink can cause system performance issues or
failure and loss of warranty coverage for resulting
damage
.
Summary of Contents for Markem-Imaje 5200
Page 34: ...Notes Instruction manual 34 ...
