7
1 OPERATION
OPERATING INSTRUCTIONS -
STANDARD MODELS
1. First, place the material to be discarded into the compactor.
Note
: If you are loading the compactor through a door or
gate, close it before starting the compactor. Refer to
“Optional Loading Configurations” on page 13 to determine
how your compactor is configure.
2. Insert the key into the key switch. Turn it clockwise and
depress for 1 to 2 seconds and release. The unit will cycle the preset number of times
determined by the Multi-Cycle Counter*, then stop.
3. Repeat, if necessary, after the compactor has stopped.
4. When you have finished using the compactor, remove the key from the key switch.
*For more information on the Multi-Cycle Counter see page 25
.
DO NOT
ENTER
DANGER
IN CASE OF EMERGENCY:
Push the large
red
button to
STOP
MANUAL OVERRIDE INSTRUCTIONS (RAM STOP REAR ONLY)
If the ram is stopped in any position:
- To move the ram forward, turn the key switch clockwise and depress.
- To move the ram rearward, hold the reverse button down, turn and
depress the key switch, release the key switch, then release the reverse button.
While the ram is moving:
- To reverse the ram while it is moving forward, press the reverse button.
- To cause the ram to move forward while it is moving rearward, depress the key
switch.
NOTE:
Refer to Optional Controls for Manual Override on Ram Stop Forward
Machines.