Ecoblade shelves install basically the same way as any
other shelf. For retrofit installations, simply remove the
exisiting shelves and replace them with the Ecoblade
shelves.
Installer retrofitting an Ecoblade shelf to an existing case.
Ecoblade shelves can be installed by just one person, as
with any other shelf. Some installers may find it helpful
however, to have two people handle the shelves so as to
keep from bending or damaging the blades. An extra
person also typically makes the process go quicker
especially on retrofits since the slots on the rear panels of
exsiting cases may not always be properly aligned due to
normal wear from use.
Two people usually can install Ecoblade shelves on retrofits more quickly.
INSTALLATION ANd OPERATION
On applications with shelf-mounted lighting, plug the
attached lighting into the receptacle on the rear panel
of the case as you would with any other shelf-mounted
lighting.
Lighting receptacle on the rear panel of a case.
A
best practice
for installing retrofits is to take a picture of
the merchandised exitisting shelves before unloading
them prior to their removal. This way, when it’s time to
restock after the Ecoblade shelves have been installed,
the merchandise can be replaced in exactly the same
locations as it was before.
Taking a picture of the existing shelf merchandising before unloading the
product is a best practice.
5