Dimensions and technical information are subject to change without notice
Parallel Grippers | Maintenance and Assembly Procedure
49
REP-2 Series
For more information call us at:
1-800-ROBOHAND
or
203-261-5558
Fax:
203-452-7418
Visit us on the Internet at:
www.destaco.com
1.141
REP SERIES MAINTENANCE
REP Series Assembled View
Item Qty Name
01
1
Body
02
1
Piston
03
1
Cam Driver
04
1
Cap
05
2
Cam Lever
06
2
Jaw
07
2
Cover
08
1
Shielded Case
09
2
Pivot Pin
65
1
Springs Kit
NOTE:
Contact the Robohand Sales
Department for a complete spare parts list
with order numbers and prices.
2
4
6
8
9
65
1
3
7
5
Accessory Installation & Adjustment Instructions
Installation - Inductive Sensors Holder Kit
1) Assemble the sensors holder (#1) onto the
gripper with its screw (#4)
2) Place the flag (#2) on one of the jaws above
the sensors holder.
3) Place the spacer (#3) on the other jaw.
4) Insert each sensor (#5) into the slot on
the holder and screw its two locking nuts,
without blocking them.
5) Position each sensor for desired stroke
position and so that it detects the flag.
6) Tighten sensor locking nuts.
1
2
3
5
6
4
Third Angle
Projection
Seal Kit
Items
Thread
Locker
Krytox
™
Lubricant
Teflon
®
Based
Grease
Lightweight
Machine Oil
Super
Bonder
1.132-1.151 (REP_RIP) RED.qxd 2/6/06 1:42 PM Page 141
