GTB Series
9
Dimensions and technical information are subject to change without notice
Servo Positioner Rotary Table | Product Safety
3.1 Training of the Personnel
Personnel selection and qualification
a) Employ only qualified or trained personnel. Give the necessary instructions and check from time to time
that only authorised personnel are working on/with the unit!
b) Work on and with the unit may only be carried out by authorized, trained personnel. Observe the
statutory minimum working age!
c) Clearly define the responsibilities and authorities of the personnel for operation, set-up, maintenance and
repair!
d) Allow persons undergoing training, instruction or an apprenticeship to work on the unit only under the
supervision of an experienced person.
e) Work on the electrical equipment of the unit may only be carried out by an electrician or by trained
persons under the instruction and supervision of an electrician. For safety reasons, the rules of electrical
engineering must be observed.
f) Work on gas and heating installations may only be carried out by appropriately qualified personnel.
g) Only experienced and qualified personnel may be allowed to work on hydraulic and pneumatic
installations!
3.2 Presentation of Safety Precautions
HAZARD SYMBOLS
SYMBOL
DEFINITION
!
DANGER
Indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
! WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
! CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in
damage to the unit, equipment, or environment.
