Douze LT M, Instruction Manual, Page: 26 / 50

LT MOTORS
22
EN EN
The LT1 battery
Locking the LT1 battery
The LT1 battery
The LT1 is fitted with a 630 Wh-capacity battery. It is locked onto its
mounting with a key lock. It must be removed by using a rotating mo-
tion as shown on the diagram below.
Check that the battery is correctly installed on its
mount before setting off.
Never leave the key in the lock as this could damage it.
Battery charge level
The LT1 charger
The battery charger supplied with the system supplies a current of 2 A.
It can fully charge the battery in around 7.5 hours. To charge the battery,
connect the power cable to the charger, taking care to push it in all
the way. Then connect the charger to a domestic 230V/50Hz socket;
a green light flashes to indicate that the charger is functioning. Next,
connect the charger to the battery using the barrel connector to start
charging; a red light comes on. Once charging has finished, the char-
ger stops automatically.
The LT1 battery has five green LED lights. When you start charging
the battery, the light that corresponds to the charge level flashes then
becomes steady. The next light flashes and becomes steady and so on
until all five lights are on and steady. Warning: the battery is only fully
charged when the five green lights have gone out.