Description of the Machine Components
2
Coffee vending
unit
Trough
Bucket sensor
Bucket
Instant ingredient
canister
Funnel extension
Rinse button
Mixing funnel
Main Switch
Whipper housing
Drip tray sensor
Indicator lamps
for BIB-packs
Drip tray
Cover
Lid, cup magazine
Cup magazine
Cup mechanism
Cup catcher plate
Cup carrier
Pot platform
Drip plate
Door
Covering foil
for cup magazine
Door locking
mechanism
Release lever
for cup carrier
4
Reference Card Error Types (continued)
Message
Possible cause
Possible action
If it was
impossible to
remedy the fault:
contact the
service if
required
Foreign body clogging sensor
for bucket
Sensor not in bucket
Clean sensor
Reposition sensor (sensor
holder must be in bucket)
Machine
does not
shut down
when
bucket is
full
Codes
Machine
only
dispensing
coffee
concentrate
or
ingredient
or too little
water is
dispensed
Water is closed
Water lines are blocked
Kink in dispensing hose
Open water cock
Check if water pipes are
blocked
Install hose of correct length
contact the
service if
required
contact the
service if
required
BIB-pack empty
BIB-pack empty
Ambient temperature too high
BIB-packs warm
Door of coffee vending unit
has not been properly closed
BIB-packs incorrectly
positioned
Left hand side BIB-pack is
empty
Right hand side BIB-pack is
empty
Temperature has fallen below
80°C
Red LED
for left side
shines
continuously
Red LED
for right
side shines
continuously
One or
both red
LED's are
flashing
Yellow LED
flashes
(power
LED)
BIB-pack
empty
No LED
illumated
LED lit but
BIB-packs
full
">"xxx
"<"xxx
TEMPERA-
TURE TOO
LOW
Replace the left side BIB-pack
Replace the right side
BIB-pack
Reduce ambient temperature.
Wait till BIB-packs have
cooled down
Close the vending unit door
Replace BIB-pack
Replace BIB-pack
Please wait.
If message does not disappear
Reposition BIB-packs correctly
contact the
service if
required
Corresponding LED is off
contact the
service if
required
