Lit. No. 74226, Rev. 00
7
September 15, 2020
5. Slide the pump box mount bracket assembly
onto the two 1/2" bolts, replace washers and lock
washers and tighten the nuts.
6. Connect the spray bar hose to the hose that exits
through the rear face of the pump box. Position
spring clamps at each end of the hose.
MOUNTING THE PUMP BOX
1. Remove all packing material from the liquid kit
before installation.
2. From the passenger's side of the spreader, remove
the two lower 1/2" nuts, lock washers, and washers.
3. Replace sill extension cover and fasten with the
fi
ve 3/8"
fl
anged cap screws previously removed.
4. Fasten the pump box mount bracket to the pump
box using four 3/8"
fl
anged cap screws.
MOUNTING THE PUMP BOX & SPRAY BRACKET
1/2" Nuts,
Lock Washers,
and Washers
3/8" Flanged
Cap Screws
Pump Box
Mount Bracket
Pump Box
1/2" Bolts
1/2" Nut
Washer
Lock
Washer
