Page 4
Assembly Method
For the assembly video, please visit:
www.youtube.com/channel/UCorBKk34KZgI96OyGSkjFdA
Step 1: Assemble the front foot pipe
Attach the front foot pipe(No.2) to the frame(No.1).
Attention: the wheels of the foot pipe should be outward.
Screw two M10*55mm Allen bolts(No.17), two M10 flat
washers(No.18), two M10 split washer washers(No.19)
by using the Allen wrench(No.32).
Step 2: Assemble the front of the rail
Attention: There are four Allen bolts(No.20), four flat
washers(No.21) and four split washers(No.22) under the
frame connection(No.4). Please unscrew them before
assembly.
For this step, please prepare the rail(No.3), front rail
cover(No.5), one lock bolt set(No.6), and two Allen
wrenches(No.32).
Cover the front rail cover to the front of the rail. Insert
the frame connection into the rail.
Disassemble one side of the lock bolt set. Insert to the
horizontal hole of the rail and screw the rubber pad and
the lock bolt back. Rotate the rubber pads upright to fix.
Screw four Allen bolts, four flat washers, and four split
washers under the rail.
1
2
18
19
17
3
6
20
21
22
5
4
