Step4: Assemble the saddle
(This step is already installed, here is how to adjust the position.)
Insert the saddle extension pipe(No.11) to the back of frame. Screw the knob(No.6) to fix it.
Page 5
Step 3: Assemble the handlebar
For this step, please prepare knob(No.6), handlebar(No.7), monitor(No.8), two batteries(No.9), phone holder
(No. 10), cable cover(No.13), four M6 Allen bolts(No.17), four M6 flat washers(No.18), and Allen wrench
(No.20).
Attention
:
Please pull out the protective metal tube first.
Insert the handlebar extension pipe to the front of frame. Screw the knob to fix it.
Attach the handlebar to the handlebar extension pipe.
Screw four M6 Allen bolts, four M6 flat washers by using the Allen wrench.
Attach the phone holder to the handlebar.
Install two batteries into the back of the monitor.
Insert the monitor to the monitor holder in front of the handlebar.
Connect the sensor cables between the frame and monitor.
Insert the plug of the pulse sensor cable from the handlebar to the monitor.
Put the cables into the cable cover together.
12
19
6
7
17
18
8
9
10
Protective Metal Tube
Pull Out
