Figure 19
Figure 20
Adjusting your New LCD Arm to your preferences
Adjusting the Position on your Desk
Adjusting the Monitor Height
Adjusting the VESA Bracket Tension
1. Remove the Monitor and Dual Arm from the Pole prior to relocating the Pole. Simply lift off the Monitor and Dual
Arm and set aside on a level flat surface.
1. Depending on the weight of your monitor and your preferences, you may find it necessary to adjust the tension of
the VESA Bracket. You can adjust the Forward/Backward Tilt of the Bracket, as well as, the Left/Right Swing of the
Monitor. Using the 6mm Hex Allen Wrench
(5)
you can adjust the bolts to the desired tension.
(See Figure 20)
1. Loosen the Collar and move Collar and Dual Arm Assembly up/down to the desired position.
(See Figure 19)
Once your Monitor and LCD Arm are completely installed you may find it necessary to make adjustments to best suit your
needs.
2. Loosen the Clamp and relocate the Pole to the new positon and tighten in place.
3. Reinstall the Monitor and Dual Arm.
INSTALLATION
Model: DS-227PS
