Appendix A: Mounting Power Supply Inside Arm
Open arm and push cable (the end with the
single black and single red cable) through the
knuckle arm hole.
Find 4 Philips head screws and tightening
washers (included). Fasten the power supply
to the arm.
Replace the bolt with the larger Allen wrench
to complete close the arm.
Position the power supply in the arm so that the
holes for the screws align.
Push the other end of the power supply cable
through the back square hole of the arm so the
arm can close without damaging the cables.
1)
3)
5)
2)
4)
