Manufacturer’s Declarations
(continued)
The
display is intended for use in the electromagnetic environment specified below.
The customer or user of the
display should ensure that it is used in such an environ-
ment.
Guidance and Manufacturer’s Declaration - Emissions
3 Vrms
150 kHz to 80
MHz
3 V/m
80 MHz to 2.5
GHz
IEC 60601
Test Level
Conducted
RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
Immunity Test
N/A
3 V/m
Compliance
Level
Portable and mobile communications
equipment should be separated from
Display (195) by no less than the
distances calculated/listed below:
D=(3.5/V1)(Sqrt P)
D=(3.5/E1)(Sqrt P) 80 to 800 MHz
D=(7/EI)(Sqrt P) 800 MHz to 2.5 GHz
where P is the max power in watts and D
is the recommended separation distance
in meters.
FIeld strengths from fixed transmitters,
as determined by an electromagnetic site
survey, should be less than the compli-
ance level in each frequency rangeb.
Interference may occur in the vicinity
of equipment containing a transmitter
symbol:
Electromagnetic
Environment - Guidance
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people
15
exerspy display
TM
