GB
Possible failures / technical data
17
Possible failures
Technical data
Failure
Cause
Corrective measure
brilliance does
not light up
Check cabling
Cabling, check power supply
polarity
Correct fault
Check power supply
Spot flashes or is
dimly lit
Power supply overloaded
Use power supply with proper
power
Cable damaged
Replace cable
Humidity inside the
spot housing
Pressure ring not properly
screwed tight
Remove ball spot glass,
slightly grease the O-ring with
Vaseline, reassemble spot
tightly
Model
brilliance 24 V monochrome
brilliance RGB
Power
10 W
10 W
Tension
24 V
12 V
Light intensity
570 lm
400 lm
Housing
Completely in V4A 1.4404, AISI 316L
Glass plate
8 mm safety glass
8 mm safety glass
Illuminant
LED
LED
Dispersion angle
10, 20, 25 and 35 degrees
10, 20, 25 and 35 degrees
Pivoting range
+/- 25 degrees
+/- 25 degrees
Axial range
360 degrees
360 degrees
Loading capacity
for loads of up to 5 tons
for loads of up to 5 tons
Installation Ø
75 mm
75 mm
Installation depth
min. 80 mm
min. 80 mm
Protection class
IP 68
IP 68
