DATA LOGGER SOUND LEVEL METER
28
(4) Hold the instrument comfortably in hand or fix on tripod and point the
microphone at the suspected noise source, the sound pressure level
will be displayed.
(5) When MAX MIN ( maximum, minimum hold ) mode is chosen. The
instrument captures and holds the maximum and minimum noise
level for a long period using any of the time weightings and ranges.
Press the MAX MIN button 2 seconds to clear the MAX/MIN reading .
“ MAX/MIN ” symbol disappears.
(6) Turn OFF the instrument and remove battery when not in use.
X. Setup TestLink SE-322 (Sound Level Meter)
—
USB interface software:
Ÿ
The TestLink package contains:
1.80mm CD.
2.Custom designed USB cable for TestLink.
Ÿ
System Required:
Windows 95 or Windows 98 or Windows NT 4.0 above.
Ÿ
Minimum Hardware Required:
PC or NoteBook with Pentium 90MHz or higher, 32 MB RAM ;
At least 5 MB byte hard disk space available to install TestLink.
Recommended resolution 800X600.
Ÿ
USB-120 / USB-300 Driver Installation Guide
Ÿ
Package contains:
(1) Install CD
(2) USB to RS232 adaptor
(3) Install manual
Ÿ
System Required:
Windows 95/98/2000NT 4.0/XP or above
Ÿ
Hardware Required:
PC or Laptop with USB port