L SERIES IP CAMERA USER MANUAL
Enter the Wireless LAN Setting, click the “Scan” button, it will show you all the wireless
networks detected in the Wireless Network List column. Select one of them and tick
“Using Wireless Lan”, then the relevant data of the selected wireless network will be
shown in the following blanks. Input the password and click “Submit”, then the WIFI
setting is finished. Unplug the cable, then you can connect to router by wifi.
Notice: When the device is connected both WIFI and wired, it will firstly connect to the wired
network. If the camera enables DHCP to obtain IP address automatically, so the IP address is not
same in wired connection and wifi connection, recommend to set fixed IP address for the camera.
2.4 Connecting to WAN
You should connect the LAN network to WAN first and do the port forwarding, connect
as figure 6.
Figure 6
If visit IP Camera from WAN, you
must
do port forwarding on the router. Example of
figure 7.
7
