6
luna 350
www.dospel.com
+48 (34) 370 30 00
2.4.
Assembly of condensation dreinage system
Steam condensation can be observed during unit's work. It is completely normal and it does
not mean abnormality in working. In order to siphon out condensate the unit is equipped with
stub pipe placed on the right side. It is essental to properly connect the pipe siphoning out
the condensate.
Exemplary way of conneting the pipe is shown below. The pipe should have adequate diameter
to the stub-pipe (16 mm). It shoud be bent into letter "U" and suffused with water until stabilizing
its level. Shipon should be palced around 120 mm from the unit and radius should not be less than
R=30 mm. Given measures should be taken as minimal.
Unit is sold with siphon and pipe,
EN
The manufacturer suggests mounting acoustic silencers in main ventilation ducts
in order
to minimize noise.
Fig.3.
Description of connectors
Air inlet
Launcher
Intake
Exhaust
WARINIG!
The manufacturer does not provide assembly elements. Required elemsts shall
be bought
be buyer separately.
siphon
Fig
4.
Place of pipe
test