Transporting and Receiving
7
1. Receiving Your Unit
For all Units
You should inspect the grinder immediately after you receive delivery.
See the "Machine Component Identification" section of this
manual for a diagram of the grinder and its components.
If you have
missing
components, contact your rental company or Dosko
Customer Service at 1-800-822-0295.
New Unit: Truck
Delivery
Depending on your unit and model, it may have been shipped on a wooden skid,
cardboard container or other appropriate method.
For any shipping damage, make sure the delivery driver acknowledges it and a
claim is filed with the freight delivery company.
Note: Shipping damage claims are not covered by Dosko
warranty. Please contact carrier!
If any assembly is required. Separate assembly instructions will be included.
New Unit: From a
Dealer
Your unit should have been delivered completely assembled and ready to run.
Read the "
Operation:
Preparing for Operation
" section (page 9), and verify that the
unit has been properly "prepped" before initial use.
Factory Delivery
In these cases, your unit has been completely assembled, tested and pre-run.
It should be ready for usage. See "Pre-Start Checklist and Procedures".
