Receiving Your Unit
7
1. Receiving Your Unit
For all Units
You should inspect the grinder immediately after you receive delivery.
See the "Machine Component Identification" section of this
manual for a diagram of the grinder and its components.
If you have
missing
components, contact your rental company or Dosko
Customer Service at 1-763-428-2237.
New Unit: Truck
Delivery
Depending on your unit and model, it may have been shipped on a
wooden skid, cardboard container or other appropriate method.
For any shipping damage, make sure the delivery driver acknowledges it
and a claim is filed with the freight delivery company.
Note:
Shipping damage claims are not covered by Dosko
warranty. Please contact carrier!
If any assembly is required. Separate assembly instructions will be
included.
New Unit: From a
Dealer
Your unit should have been delivered completely assembled and ready to
run.
Read the "
Pre-Start Checklist & Procedures
" section, and verify that
the unit has been properly "prepped" before initial use.
Factory Delivery In these cases, your unit has been completely assembled, tested and pre-
run. It should be ready for usage. See "Pre-Start Checklist and
Procedures".
