Position the fan
1. The tripod features flexible legs
that can be used as a stand, or
to suspend or attach the fan to
other objects.
Bend the legs to the desired position, taking care to
ensure that they are not bent to a sharp angle.
(Example)
4
Do not place the fan on or near your
head or important objects. This may
cause the product to fall to the
ground, resulting in damage or an
injury.
Important information about using the tripod
•The tripod is made of metal and features a
protective outer layer to prevent damage in the
event of contact with small amounts of water.
However, the tripod should not be placed in areas
that are frequently exposed to moisture or water.
(The main unit is not waterproof.)
•Do not bend the legs repeatedly at the same
position, as this may cause the legs to snap.
•The top of the legs are particularly susceptible to
aging and should not be bent to large angles.
The product supplier shall not be liable for any
damage or injuries caused by the fan falling off the
tripod or other surfaces.
Check that the fan unit and tripod are
securely attached
If the fan unit and tripod are not attached
correctly, the fan may fall off the tripod
when subjected to small movements.
Detaching the fan unit from
the tripod
Attaching the fan to the tripod
The fan unit can be detached from the tripod.
This allows you to charge the battery and
conduct maintenance work without the tripod in place.
Hold the tripod in one hand and
twist the fan unit with your other
hand . Detach the fan unit from
the tripod .
1.
Hold the tripod in place and twist
the fan unit with your other hand .
2.
Twist the fan unit. Remove the fan from
the tripod.
As shown in the image, align the
hole on the bottom of the fan
unit with the protruding socket
on the tripod .
1.
The oval-shaped part on the tripod should be
aligned with the oval-shaped part on the fan .
Detach
Assemble
Both parts
are aligned
Warning
Caution