DOSHISHA FLU-253DHK User Manual Download Page 6

Packing List

After purchase, please confirm if the following accessories are complete

Warning

Attention

Do not throw away the packaging materials after assembly, which can be used to store the product after use.

● 

Do not turn on the power before the blades and guards are installed.

● 

Do not turn on the power before the main unit in the correct setting (in a stable place and the 

support frame is raised).

Preparation before Use

1.  Install the battery into the remote control

① 

Pull out the battery case from the remote control
Pull the battery case out of the gap.

② 

Insert the coin lithium battery into the battery case. 

Pay attention to the polarity        of the battery Keep 

the    side upwards.

③ 

Insert the battery case into the remote control

④ 

Please insert the battery case until you hear a click 

sound.

Usable range

● About 5m in front of the main unit
● About 30° to the left and right sides in front of the main unit
● When there is an obstacle between the remote control and 

the main unit, the remote control may not work properly.

2. Place the main unit on a stable level place
3. Press the base to erect the support frame

Press the base to prevent it from moving, and then erect 

the support frame to prevent the baffle from moving.

Raise the support 

frame until the 

baffle can’t move

● To extend the life, remove the battery 

when it is not used for a long time.

● Please properly mount the battery pole    

        to avoid battery rupture or liquid 

leakage.

● Do not charge, short circuit, disassemble, 

throw in fire or heat the battery.

● When liquid leakage occurs, clean it 

completely before inserting a new battery.

● Please pay special attention to avoid 

pinching fingers by the base or support 

frame.

When erecting the support frame, raise it 

until the baffle can’t move; do not stop 

midway.

It may cause accident or injury.

Main unit·······················································1pcs
Remote control···············································1pcs

AC adapter····················································1pcs

Coin lithium battery (CR2025)····························1pcs

User Manual···················································1pcs
Warranty Card················································1pcs

Attention

How To Use

Summary of Contents for FLU-253DHK















Reviews: