18. In order to avoid a hazard due to inadvertent resetting of the thermal
cutout, this appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly switched
on and off by the utility.
19. If the supply cord is damaged, it must be replaced the manufacturer or its
service agent or a similarly qualified person must place it in order to avoid
a hazard.
20. The heater has LED inside, could be replaced but should be authorized by
electric technician or a similar qualified person.
21. WARNING: This heater is not equipped with a device to control the
room temperature. Do not use this heater in small rooms when they
are occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
Instructions to use
Switch
Model
I
II
I + II
III
DOSHTSQYH04A
900W
900W
1800
On/Off
Controls:
Remote Control Function:
Overheating safe device
Your heater is fitted with a safe device that switches off the heater in the
event of overheating.
If the heater stops working, turn the heater off and inspect the blockage
of inlet or outlet. Disconnect the plug and wait at least 10 minutes for the
protection system to reset before attempting to restart the heater. If the safe
device still switches the heater off and makes the heater fail to operate,
take the heater to your nearest service center for examination or repair.
Attention:
before restarting the heater, the plug must be disconnected
for at least 10 minutes.
Flame effect
(Power) ON/OFF
900W
900W
طاو ٩٠٠
ةﺎﻛﺎﺤﳌا ﺔﻠﻌﺷ ءﺎﻔﻃإ
فﺎﻘﻳإ / ﻞﻴﻐﺸﺗ
طاو ٩٠٠
فﺎﻘﻳا
OFF
ﺢﺘﻓ
ON
2
