Press and hold the power button until the red light
turns on. The red light will be solid until the device
vibrates and powers off.
The device cannot make
calls if powered off.
Press and hold the power button to power back
on. PERS+ will vibrate and state the battery level:
“Battery OK” or “Battery low, please charge.” The
lights around the call button will be solid for 5
seconds, and then the blue call light will flash every
5 seconds.
Please wait 2 minutes after restarting
before pressing the call button.
Plug in the charging cradle
and place PERS+ into the
cradle as shown. PERS+
will vibrate and state
“Charging.”
IMPORTANT:
Fully charge PERS+
before first use.
HOW TO CHARGE DOSE PERS+
Typical charging time is 2-3
hours. The red battery light flashes
every 5 seconds while charging
and is solid when PERS+ is fully
charged.
1.
2.
PERS+ will state, “Your device is now active. Please
press your button,” once activation is complete.
NOTE: PERS+’s rechargeable battery lasts up to 7 days
per charge. Only charge as needed. Wear your device as
often as possible to be protected. is fully charged.
To restart PERS+ with the power button:
