Product Information
Title
indePendant
Type
DECT PENDANT
Charging : Make sure that Device is correctly placed on
Charging Disc. LED indicates battery level status during
charging. Note that Device cannot be registered, if battery is
not sufficiently charged.
Registration: Please keep in mind that DECT base stations
exit Registration mode automatically after 5 min.
Use PC APP to register Device, if PIN of the base station is
not '0000'.
Trigger Help Call: Select and test “Ringing Time" in order to
ensure, that the called party has sufficient time to answer
the call. The ringing time should not be too long in order to
not delay the call of the subsequent numbers . Better
choose more repetitions in order to find a contact quickly
and safely.
Call Family & Friends
For more information please contact your distributor or visit his website
trigger Help Call
1. Connect enclosed USB stick to PC
2. Select „INDEPENDANT“ with WIN Explorer
3.
Start „PC_APP" program and if necessary, confirm the
driver installation
4. Connect Device via USB cable to PC
5. Start "PC_APP“ program again and follow instructions of
PC APP which are very simple
Color
Display
Status LED
Ring LED
RED
flashes
DECT or Battery
out of range / order
Help Call is setup
constant
charge ca. 60 min
Help Call is active
YELLOW
flashes
DECT or Battery
sufficient
- DECT Registration
- Fall Detection active
constant
charge ca. 30 min
connected with PC APP
GREEN
flashes
DECT or Battery
OK
Family&Frriends Call
is setup
constant
Battery is fully
charged
Family&Friends Call
is active
LEDs
Tips
start PC APP
6
10
7
8
9
11
1. Press Call Button > 2 sec
2. Help Call Sequence is starting
3. To cancel Call Sequence press Call Button again
1. Press side key to select wanted number (name)
2. Press Call Button to trigger call
3. To cancel call press Call Button again
CONFIGURATION
Test Device functions
You will find more up-to-date operating instructions on enclosed USB-stick
or on your distributor’s website
