Customer Service and Technical Support
1 - 8 0 0 - 5 2 3 - 8 4 9 9
Attach instruction card to injector with zip tie provided.
2
3/4” polypropylene Banjo single union ball valve
1
3/4” polypropylene 200 mesh tee filter
1
3/4” brass pressure regulator w/gauge
1
3/4” 14 GPM flow restrictor
1
3/4” polypropylene check valve
2
3/4” union schedule 80 PVC
7
3/4” x 2” Banjo polypropylene fittings
1
1/2” x 1/2” Banjo barb fitting
1
3/4” Banjo T
3
3/4” Banjo street elbows
1
Roll of Teflon tape
1 Instruction
card
1 Zip
tie
IPK34 - 14 GPM includes:
1
1/2” x 2” Banjo polypropylene fittings
1
1/2” stainless steel ball valve
1
3/4” male to 1/2” female Banjo reducer bushing
Wrap all male fittings with eight (8) turns of Teflon tape
if white, only four (4) turns if thicker pink tape.
Install the following with their arrows pointing in the
same direction as the flow:
Check valve
Filter
Pressure regulator
Inlet
ball
valve
Street
elbow
Street
elbow
Check
valve
Stainless
steel ball
valve
Filter
Pressure
regulator
w/gauge
Union
Union
Street
elbow
Inlet
Outlet
Flow
restrictor
Instruction
card
When connecting a DOSATRON either to the public water supply or to its own water source, you
must respect the regulations in force concerning protection of the source i.e. backflow prevention, etc.
Reducer
bushing
Outlet
ball
valve
T
Barb
fitting
3/4”
fitting
1/2”
fitting
Teflon tape
(Use 8 turns of Teflon
tape if white, only 4 turns
for thicker pink tape)