5
Grab the other end of the
ORPDT
on the inlet side
of the
PRV,
and attach it to the Discharge Valve of
the pump’s head. Follow instructions in step 16 to
attach the tube.
Mount the
PRV
to the wall or surface using 1/4”
screws/bolts. Make sure the tube runs with no
tension from the pump to the
PRV.
Grab the Injection Valve from the pump box. Insert
the Injection Valve into the
¾” to ½” Reducer
Bushing
in the
Micro-Doser Plumbing Assembly,
hand tighten only.
Anchor the
Micro-Doser Plumbing Assembly
to
the wall or surface, right underneath the pump.
Remove the Nut, Collar, and Nozzle from the top
of the Injection Valve, and attach the tube from
the outlet side of the
PRV,
following the same
procedure in step 16.
Your
Micro-Doser 1 ½” Kit
assembly is now
connected to your pump.
18
19
20
21
22
Discharge
Valve
PRV
inlet
PRV
outlet
23
flow
flow
