1-800-523-8499 • 1-727-443-5404
15
Carefully press the piston back
into the injector and install the
bell housing.
To finish up, carefully insert
the plunger into injection
stem assembly.
NOTE:
Be extremely careful
not to bend the plunger
when reassembling.
Align the notches in the lower
part of the blue body with the
teeth on the top of the injection
stem assembly. Make sure the
scale of your preference is
facing out.
If the scale you prefer is not
facing out, loosen the stem nut
and remove. Pull the stem down
slightly, rotate 180 degrees and
push it back up.
20
19
21
