5 . 5 Surface Illumination
Illumination of surface features on solid objects is achieved through the
use of high intensity LED optics.
For the brightest reflected image, place the light source as close as
possible to the face of the component to be inspected. Where components
have a directional surface finish, e.g. ground faces, the surface texture
should be placed at right angles to the table, this will give the brightest
reflected image on the screen.
5 . 6 Manual Table Adjustment
The X axis of the stage has a quick release for coarse motion. This feature
should not be used to move the stage during a measuring routine. Also,
when the quick release is engaged, the control knob of the X axis is
disabled.
To engage the quick release, rotate the lever to the furthest position to the
right. To re-engage the control knob rotate the lever to the furthest left
position. (see the picture below)
5. OPERATING
ON
OFF
