Thank you very much for purchasing a SemiPro studio flash.
Please read these instructions carefully to enjoy the use of the flash at its maximum.
Features of SemiPro Studio Flashes
The modern design of the flash housing comes along with a high durability and simple and user-friendly use of the flashes. The flashes provide perfect
lighting e.g. for portraits, fashion, wedding or product photography. The SemiPro flash comes with a compact yet powerful modeling light.
Both the flash light and the power of the modeling light can be controlled variably. The SemiPro studio flashes are easy to transport.
You will reach great effects especially when used in combination with the manifold DÖRR studio accessories such as softboxes,
reflectors, umbrellas, barn doors, conical snoots and more.
Control Panel
1. Photo Sensor
2. Power Control Dial
3. Fuse
4. Power Socket
5. Sync Socket
6. Charging Indicator
7. Test Button
8. Main On/Off Button
9. Beep Sound ON/OFF Switch
10. Photo Sensor ON/OFF
11. Modeling light ON/OFF Switch
12. Locking Handle
Specifications of SemiPro Flashes
Flash Model
SemiPro 160
SemiPro 260
SemiPro 360
Flash Power
160Ws
260Ws
360Ws
Modeling Lamp Power
50W
50W
50W
Flash Recycling Time
1 - 2,1sec
1 - 2,3sec
1 - 2,3sec
Power Control
1/16 ~ Full Power
1/16 ~ Full Power
1/16 ~ Full Power
Coverage Angle
approx. 80°
approx. 80°
approx. 80°
Flash Duration
1/400-1/1100sec
1/400-1/1100sec
1/400-1/1100sec
Color Temperature
5300K ~ 5600K
5300K ~ 5600K
5300K ~ 5600K
Flash Triggering
Photo sensor, Sync Cable, Test Button
Photo sensor, Sync Cable, Test Button
Photo sensor, Sync Cable, Test Button
Power Source
AC 110-120V 60Hz / AC 220-240V 50Hz
AC 110-120V 60Hz / AC 220-240V 50Hz
AC 110-120V 60Hz / AC 220-240V 50Hz
Included
•
Power cord
•
Sync cord
•
Fuse
•
Manual
•
Modeling light bulb
Note
In order to avoid over-exosure, the flash must absorb excessive energy which comes up after a flash power reduction. Press the test button once, before you continue
taking pictures.
Safety Hints!
•
Use and store the flash unit in a dry environment only. Keep it away from dust and humidity.
•
Avoid vibration to the flash especially when it is working. The filament can easily be damaged.
•
Der Blitzkopf erhitzt sich bei Gebrauch. Berühren Sie das Gehäuse nicht, um Verbrennungen vorzubeugen.
•
Do not remove or exchange the bulb before the flash has been switched off for at least 10 minutes. Your fingers can get burned.
•
The flash unit is operated with high voltage. Do not disassemble the housing. In case it proves defective, contact a specializing service agents.
•
Avoid strong light directing to the photo sensor.
•
Make sure to switch the flash off power after use.
Specifications are subject to change without notice.
The CE marking complies with the European directives.
You can download the relative EU declaration of conformity with following link:
http://www.doerrfoto.de/info/EG-Konformitätserklärungen
USE ONLY WITH 250V FUSE
POWER
MODEL
SYNC
REMOTE
BEEPER
TEST
READY
~220-240V
50Hz
FUSE
1/16
1/8
1/4
1/2
1
