1
Product overview
1.1
Overview
Fig. 1: Overview
1 Type plate
2 Pressure side connection for material supply
3 Material assembly
4 Pneumatic assembly
5 Compressed air connection
6 Suction side connection for material supply
7 Mounting feet
1.2
Short description
The double diaphragm pump with pneumatic
actuator (from here on “pump") is an air operated
positive displacement pump. The pump is used to
pump low- to medium-viscosity liquids (flammable
and non-flammable coating materials) in industrial
coating of surfaces.
2
Safety
2.1
Presentation of Notes
The following notes can appear in this instruction:
DANGER!
High risk situation that can lead to serious inju-
ries or death.
WARNING!
Medium risk situation that can lead to serious
injuries or death.
CAUTION!
Low risk situations that can lead to minor injuries.
NOTICE!
Situations that can lead to material damage.
ENVIRONMENT!
Situations that can lead to environmental
damage.
Additional information and recommenda-
tions.
2.2
Intended Use
Use
The
Eco
Pump AD is solely intended for pumping
low- to medium-viscosity fluids of the fluid group 1
according to the Pressure Devices Directive.
The
Eco
Pump AD is intended for use in industry
and trade only.
The
Eco
Pump AD may be used under the fol-
lowing conditions:
in explosive areas of Ex zones 1 and 2
in non-explosive areas
with flammable fluid coating materials of the
Explosion group IIA
with non-flammable fluid coating materials
Only use the pump within the approved operating
conditions
Misuse
If used improperly, it can cause serious injuries.
Examples of wrong use are:
Use in areas with Ex zone 0
Use of unapproved materials, see safety data
sheets
Making conversions or changes on your own
Use of pumps as a support for the pipe system
Ex labeling
II 2G Ex h IIA T4 Gb X
Product overview
01/2020
EcoPump AD - MPU00013EN
5/36
