DÖRR EcoPump AD, Operation Manual

Page: 28 / 36

11.2 Disposal
ENVIRONMENT!
Improper waste disposal
Improper waste disposal threatens the environ-
ment and prevents re-use and recycling.
– Clean components before their disposal.
– Always dispose of components in accordance
with their characteristics.
Ä 12.8 “Materials used”
– Collect leaked out utilities and auxiliaries
completely.
– Dispose of work equipment soaked in coating
materials or operating substances according
to the disposal provisions in force.
– Dispose of utilities and auxiliaries according
to the disposal provisions in force.
– In case of doubt, refer to the local disposal
authorities.
Requirements:
Pump has been cleaned Ä 8.2 “Cleaning” and
purged Ä 7.4 “Rinsing”.
Pump has been disassembled Ä 11.1 “Disas-
sembly”.
Personnel:
Mechanic
+ additional qualification explosion protection
Protective equipment:
Protective gloves
Eye protection
Anti-Static Safety Boots
1. Dispose of material residue from pump profes-
sionally.
2. Remove the seals. Ensure professional dis-
posal.
3. Dispose of individual parts of the pump profes-
sionally.
12 Technical data
12.1 Dimensions and weight
Fig. 24: Dimensions
Detail Value
Height 498 mm
Width 334 mm
Depth 376 mm
Particle size max. 6.4mm
Weight 38.3 kg
12.2 Connections
Detail Value
Compressed air connection 1/2" NPT (IG)
Inlet connection 1 1/2" BSP
(IG)
Outlet connection 1 1/2" BSP
(IG)
12.3 Operating conditions
Detail Value
Operating temperature, min. 10°C
Operating temperature, max. 50°C
12.4 Operating values
Detail Value
Control air pressure, max.
8.3 bar
Material output pressure, max.
Technical data
01/2020 EcoPump AD - MPU00013EN 28/36