English
Installation
IMPORTANT!
Turn off the phone and disconnect the charger before removing the
battery cover.
Installing the SIM card, memory card and the battery
The SIM and memory card holders are located inside the battery
compartment.
S IM
1
2
3
G
B
4
1.
Remove the battery cover and the battery if it is already installed.
2.
Insert the SIM card by gently sliding it into the holder. Make sure
that the SIM card’s contacts are facing inwards and that the cut off
corner is pointing downwards. Take care not to scratch or bend the
contacts on the SIM card.
3.
To insert a memory card by gently sliding it into the holder. Make
sure that the memory card’s contacts are facing inwards and that
the cut off corner is pointing upwards. Take care not to scratch or
bend the contacts on the memory card.
To remove the memory card: find the small ridge on the exposed
end of the memory card. Put your fingernail into the ridge and gently
pull the memory card out.
4.
Insert the battery by sliding it into the battery compartment with the
contacts facing upwards to the left. Replace the battery cover.
IMPORTANT!
Use only compatible memory cards for use with this device. Compatible
card type:
microSD, microSDHC
.
Incompatible cards may damage the card itself, the device and corrupt
data stored on the card. Depending on the market some phones may
have a pre-installed memory card.
1
Summary of Contents for PHONEEASY 612
Page 1: ...English Doro PhoneEasy 612...
Page 2: ...17 18 19...
