Doro COMFORT 3005, Manual

Page: 11 / 20

English
2. Record your outgoing message. Speak clearly towards the machine from a distance
of 15-20 cm.
3. Release to stop recording.
4. The outgoing message will be repeated after a few seconds. Repeat this procedure if
you want to change the message, any old outgoing message will automatically be erased
when a new one is recorded.
Check outgoing message
Press . The current outgoing message will now be played.
Restore the pre-recorded message
1. Press and hold . You will hear a short beep, the LED will flash and RECORD OGM is
displayed, release .
2. The pre-recorded outgoing message is played after a few seconds.
Note!
You can record 2 different outgoing messages, one for (normal) ANSWER/RECORD and one for
ANSWER ONLY . See Answer only, p. 7 on how to select ANSWER MODE .
ICM (incoming message)
The red indicator /
1
flashes to indicate that new messages have been received.
Playback will always begin with any new messages, for example if there are three old
messages and two new ones, only the two new ones will be played back, then the answering
machine will return to standby mode.
Press the play key once again to listen to all messages, starting with the oldest messages.
1. Press to start playback.
With PRIVACY MODE activated you need to enter the PIN CODE (default=0000) and
then press
0
. The answer machine will then play the incoming message(s).
2. After each message a short beep will be heard.
3. When playback is finished you will hear a short beep, and the machine will return to
standby mode. All incoming messages are saved (unless you have erased any during
playback), new messages will then be recorded after the old ones.
Following functions are available during playback
Key Function
Repeat the current message, or press twice to step back through the message
Skip to next message
Stop playback
c
Erase messages
v / V
Increase or decrease the speaker volume
Pause during playback (max. 7 seconds). Press again to resume playback
8