Doro AUDIOLINE 20, User Manual

Page: 20 / 25

18
OTHER AUDIOLINE 20
TROUBLE GUIDE
THE TELEPHONE DOES NOT WORK
P
Is the power adapter connected correctly?
P
Is the line cord connected correctly?
P
Are the batteries in the handset charged?
P
Connect a different telephone to the same wall socket. If the other telephone does not
work, contact your Network operator.
THE DISPLAY ON THE HANDSET IS BLANK
P
Is mains power switched on?
P
Are the batteries charged?
THE HANDSET DOES NOT RING
P
Is the ringer programmed Off?
WHEN ON A CALL, A WARNING TONE IS HEARD
P
The batteries’ power may be low (recharge the handset for 15 hours).
P
The handset may be out of range - move closer to the base unit.
NO DIALLING TONE
P
Have the handset batteries been charged for 15 hours?
P
Is the Base connected to a mains power socket and mains power switched on?
P
Is the telephone line cord plugged into a telephone Network wall socket?
THE HANDSET WILL NOT CONNECT WITH AN INCOMING CALL
P
Because this is a cordless telephone, the ringing signal has to be transmitted to
the handset which can take a few seconds. It is important that a call is not
picked-up on the handset until the handset rings.
YOU CAN NOT CALL OR PROGRAMME THE PHONE:
P
If the display show
"BARRING
" is the call barring activated
P
If the display show
"HOLD
" is the keypad lock activated.