Doro AUB 6, Manual, Page: 3 / 12

English
3
www.doro.com
Installation
Connection
1. Connect the curly cord to the handset and to the socket marked
Handset
located on the left side
of the telephone.
2.
Connect the line cord to
the telephone and network wall socket.
3.
A click will be heard when the modular plug is correctly in place.
4.
Lift the handset and listen for the dial tone. Your telephone is now
operational.
Connection of a headset
A headset can be connected to the socket
on the left side of t
he telephone marked
Simply press the Speaker/H eadset button to access an incoming call or dial tone,
press again to terminate the call.
While a headset is connected the Hands Free function will NOT operate.
IMPORTANT!
Th
e AUB 6 MW
is designed to operate with DORO original headsets. Other
manufacturer headsets may be used, although the function and sound quality cannot be
guaranteed.
Any damage occurring due to incompatible or non Doro headsets being installed, will not be
covered under the telephones guarantee.
Headset.
1. Press
Speaker/Headset
. Dial tone will be heard
and the speake r light will
illuminate.
2. Dial the telephone number required.
3. Press
Speaker/Headset
again to terminate the call.
Making a call using either Hands Free or H eadset
1.
Press
Lift the handset, d
ial tone will be heard
.
2.
Dial the telephone number required.
3.
Replace
the h
an
dset to terminate the call.
Making a call
Carefully remove the battery cover from the underside of the telephone and
install 3 x AAA alkaline batteries observing correct polarity .
5 .