Doro 670, Manual

Page: 6 / 24

English
Making a call
1. Enter the required number.
2. Press , the number is dialled. Press
L
to terminate call.
Receiving a call
1. Wait for the handset to ring.
2.
Press to answer. Press
L
to terminate call.
Please note!
To switch between handset/handsfree press . Please remember that in speaker mode, it is only possible for
only one person at a time to talk.
This product does not usually ring on the first signal to allow correct matching to the phonebook.
If the telephone cannot connect to a line, a warning tone will be heard. The problem may be due to the batteries
running low, the handset being too far from the base unit or all of the transmission channels being engaged.
Recall (R) button
To avoid having to remember commands, certain network services have been pre-
programmed to the menu buttons, see Other network services .
Volume control
The volume may be adjusted during a call using
}
/
{
. Press OK .
Turning off/on
Press and hold the
L
button for a few seconds to turn the handset off or on.
Confirm disconnection by pressing Yes .
Redial function
Press
8
and scroll among the 30 most recently dialled numbers using
{
/
}
. Press .
Mute button
The microphone can be turned off/on during a call using
8
.
KeyGuard
The KeyGuard is turned off/on by pressing and holding
#.
Paging
Pressing
J
on the base unit will activate the paging signal of the handset. The signal will
stop automatically after a while or if the L button on the handset or the
J
button on the
base unit is pressed.