Doro 513c, Instruction Manual

Page: 4 / 29

English
4 www.doro.com
English
www.doro.com 5
Operation
Connection
1.
Connect the curly cord to the handset and to the socket marked
q
on the
underside of the telephone.
2. Connect the telephone line cord to the socket marked
T
on the underside of
the telephone, and then to a telephone network wall socket.
3. You will hear a click when the modular plug is correctly in place.
4. Lift the handset and listen for the dial tone. Your telephone is now
operational.
5. Australia/New Zealand only: Ensure that the recall button timing switch
underneath the telephone is correctly set (100 ms AUS or 600 ms NZ).
Ringer
On the right hand side and underside of the telephone are switches to adjust the
ringer volume, type and tone.
Ringer volume
Ringer type
Ringer tone
Volume control
The handset earpiece volume may be adjusted during a call using . Press the
right side of the button to increase and the left side to decrease the volume.
Mute button
The handset microphone can be disabled during a call by pressing
z
. Press
z
once
more to reactivate the microphone. The LED next to the button flashes when the
microphone is muted.
Redial button
If the number dialled is engaged or if you wish to redial the last number dialled, lift
the handset and press the redial button
r
.