Doro 5055 User Manual Download Page 36

Page: 36 / 40

English

www.doro.com

Other

If you cannot resolve the fault using the faultfi nder section, technical

support is available on the

Premium Rate Number: 0906 302 0114.

Calls cost

50 pence per minute

(prices correct at the time of going to

press), and is operational between 9AM - 5PM Monday-Friday excluding

Bank Holidays. Alternatively, E-mail on: [email protected]

You can contact us in writing:

Consumer Support Group, Doro UK

Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire,

B98 9HE, (regarding any Spares or Technical query), or

Telephoning (Spares only): 01527 584377

Web site: www.doro-uk.com

Specifi c Absorption Rate (SAR)

This telephone complies with applicable international safety

requirements for exposure to radio waves.

The SAR-value of this product is not greater than 0.022 W/kg (measured

over 10g of tissue).

The maximum limit according to WHO is 2W/kg (10g of tissue).

Guarantee

This product is guaranteed for a period of 12 months from the date of

purchase.

Proof of purchase is required for any service or support required during

the guarantee period.

This guarantee shall not apply to a fault caused by an accident or any

similar incident or damage, liquid ingress, negligence, abnormal usage,

not reasonably maintained or any other circumstances on the purchaser’s

part. Furthermore, this guarantee shall not apply to a fault caused by a

thunderstorm or any other voltage fl uctuations.

This guarantee does not in any way affect your statutory rights. (As

a matter of precaution, we recommend disconnecting the telephone

during a thunderstorm.)

Summary of Contents for 5055









































Search results

Summary of Contents for 5055

Reviews:

Related manuals for 5055

Brands by name

Popular brands

Doro 5055, User Manual

Search results

Summary of Contents for 5055

Reviews:

Related manuals for 5055

Brands by name

Popular brands