Doro 131, Manual

Page: 6 / 24

English
www.doro.com
Installation
Unpacking
The package should include the following items:
- Handset - Mains adapter
- Base unit - Line cord
- 2 NiMH batteries
Models with an extra handset (e.g. +1) are also supplied with an additional handset,
batteries, charger and electrical mains adapter.
Connection
1.
Connect the mains adapter to the socket on the base unit and to an electrical
wall socket.
2.
Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
3. Place the handset in the base unit with the keypad facing outwards. Once the
handset is correctly positioned in the base unit a beep will be heard.
4. Charge the handset batteries without interruption for 24 hours initially
(thereafter fully discharged handset batteries will take 10 hours to recharge).
5. ONCE CHARGED, connect the telephone line cord to the socket on the base
unit and a network wall socket.
6.
A click will be heard when the modular plug is correctly connected.
Only for models with an extra handset (+1):
7.
Connect the mains adapter to the socket on the base and an electrical wall
socket.
8. Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
9.
Charge the handset batteries without interruption for 24 hours initially
(thereafter fully discharged handset batteries will take 10 hours to recharge).
IMPORTANT!
Under power failure conditions this telephone will not operate. Please ensure that a separate
telephone not dependent on local power is available for emergency use. The earpiece of the handset
may attract small ferromagnetic objects such as staples and pins, care should be taken when placing
the handset near such items. Do not place the base unit in areas of high humidity of where it will be
exposed to direct sunlight or other major heat sources.
Only use with the supplied power adapter/s.