851-565 Rev. G
21
Dorner Mfg. Corp.
6200 Series Industrial End Drive Conveyors
Preventive Maintenance and Adjustment
Bearing Installation
1. Orient bearing anvil/sleeve removal tool (part # 25-09*)
(Figure 52, item CS) with cavity facing up and place
pulley (CQ) onto tool.
Figure 52
Figure 52
2. Install bearing insertion tool (part # 25-10*) (Figure
53, item CT) into arbor press or similar device.
Figure 53
Figure 53
3. Place and hold bearing (part # 21-33) (CR) onto tool
(CT).
Figure 54
Figure 54
4. Press bearing (Figure 55, item CR) into pulley (CQ)
until seated.
Figure 55
Figure 55
CS
CQ
CT
CR
IMPORTANT
Bearing and pulley alignment is critical.
CR
CQ
