3100 & LPZ Series Bottom Mount Drive Package for Light & Standard Load 60 Hz Gearmotors SOMM
851-436 Rev. B
6
Dorner Mfg. Corp.
2
.
If required, change gearmotor position by removing
four (4) screws (Q of Figure 5). Rotate gearmotor to
other position and replace screws (Q). Tighten to
110 in-lb (12 Nm).
Figure 5
Q
Q
3
.
Locate drive output shaft (R of Figure 6) and remove
screws (S).
Figure 6
R
S
4
.
Attach mount assembly (I of Figure 7) with screws
(O). Install medium length screws on bottom, long
screw upper left, short screws upper right. Tighten
screws to 110 in-lb (9 Nm).
Figure 7
I
O
O
Ç
Drive shaft keyway may be
sharp.
HANDLE WITH CARE.
WARNING
5
.
Install key (N of Figure 8).
Figure 8
N
M
P
J
6
.
Wrap timing belt (P) around driven pulley (M) and
drive pulley (J). Install driven pulley (M) onto
conveyor shaft.
Installation
