Dorman Smith Loadbank 250
Incomer Metering harnesses
Installation instructions
REV 2
No: SN98465C
Sheet 3 of 3
Fig 7:
·
Mount meter to hinge door by
removing ‘knock-out’ feature.
·
Connect ‘CT harness’ to the me-
ter.
·
Connect ‘meter supply harness’ to
the meter.
While Dorman Smith Switchgear have made every reasonable effort to ensure the accuracy of the information contained in this catalogue, Dorman Smith Switchgear cannot assure that this
information is error free. For this reason, Dorman Smith Switchgear does not make any representation or offer any guarantee that such information is accurate, correct, reliable or current.
Dorman Smith Switchgear reserves the right to make any adjustments to the information at any time. Dorman Smith Switchgear expressly disclaims any implied warranty regarding the infor-
mation contained herein, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Dorman Smith Switchgear‘s only obligations are those stated in
Dorman Smith Switchgear’s Standard Terms and Conditions of Sale. Dorman Smith Switchgear will in no case be liable for any incidental, indirect or consequential damages arising from or in
connection with, including, but not limited to, the sale, resale, use or misuse of its products. Users should rely on their own judgement to evaluate the suitability of a product for a certain purpose
and test each product for its intended application. Dorman Smith is a trademarks.
Dorman Smith Switchgear Limited
8 Swinbourne Drive
Springwood Industrial Estate
Braintree, Essex CM7 2YG
Phone: +44 (0)844 225 1063
Fax: +44 (0)844 225 1064
Email: [email protected]
www.dormansmithswitchgear.com
Fig 8:
·
For Integra 1630 meters
loop brown and blue cables
into terminals 1 & 2
Refer to installation instruction sheet
supplied with meter for set up
Pulsed output connections
CT connections
Meter supply harness
Refer to installation instruction sheet
supplied with meter for set up
Mounting multifunction meter
Fig 6:
·
Mount meter to hinge door by
removing ‘knock-out’ feature.
·
Connect ‘CT harness’ to the
meter.
·
Connect ‘meter supply harness’
to the meter, ensure loop brown
and blue cables into aux termi-
nals
·
Ci meter shown with no auxiliary
output modules.
Meter supply harness
CT harness
Integra 1630
Integra Ci3 & Ci1
